|
Post by 383 matt on Nov 27, 2018 2:05:07 GMT
Hi looking to see if anyone has a idea what stock 40ci cam is the best for racing I know the 40 ci intek comes factory with a couple of different ones and in my rules the motor has to be stock just looking for a edge thanks
|
|
|
Post by thebandit21 on Nov 27, 2018 2:23:00 GMT
Do you know what the specs are for the different stock cams? You could try installing them retarded so you will have a higher usable rpm range. Another tip is to tighten up the valve lash to get the most out of the stock cam, the air cooled cylinders grow a lot more and it increases the valve lash at temperature unlike a liquid cooled engine. I've run the valves as tight as .002- .003" on the intake side. Make sure you have decent valve springs to keep the valves from bouncing on the seats, that is usually the biggest cause of stock valve failure.
|
|
|
Post by 383 matt on Nov 27, 2018 2:40:28 GMT
Thanks I’m not sure of the lift on each cam but I know that there are 3 different ones and I heard that 1 is better then the others but can’t remember which one . 1 is a spoked one the other ones are a solid timing gear
|
|